2024 Exmark LZE801GKA724C1 72" Kawasaki

$12,999.00

$12,999.00

Key Features

Availability Brochure
Year2024
MakeExmark
ModelLZE801GKA724C1 72" Kawasaki

Product Features

Description

The perfect choice for professional landscaper who want the innovative and commercial-grade quality of a Lazer Z zero-turn riding mower, but in a value package. The Lazer Z E-Series zero-turn mower features the same welded, heavy-duty, 1.5"x 3" tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines, a Kohler® Command™ Pro, or a Vanguard V-Twin engine matched to a full-floating, UltraCut™ Series 4 cutting deck, in 48, 52, 60, or 72-inch deck widths. Lazer Z E-Series zero-turn mowers come equipped with a full-suspension seat that enhances operator comfort, leading to less fatigue and increased efficiency.



Like our full lineup of zero-turn mowers, the Lazer Z E-Series offers unparalleled durability and precision maneuverability. Be sure to check out the rest of the Lazer Z family of mowers, like the Lazer Z S-Series zero-turn mower.

Features
  • Hydro Drive, Simplified: Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
  • Unibody Frame: Our one-piece body frame is a classic case of “less is more." Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z's unibody frame is actually a case of “less is way more."
  • Less Time At The Pump: Gas-powered E-Series models have a single 8-gallon tank with one fill location.
  • On-Board Diagnostics: Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
  • Fewer Grease Points: With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
  • Ultracut Series 4 Deck: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
  • Rear Discharge Deck: Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
  • Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
Equipment
  • Starter: Electric
  • Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Caster Forks: .50 in. thick caster yoke arms.
  • Front Caster Tires: 13 x 6.50-6, smooth-tread, semi-pneumatic.
  • Drive Tires: 24 x 12-12, 4 ply Super Turf®
  • Parking Brake: Lever-actuated disc brake.
  • Tractor Frame: Unibody, welded, heavy-duty 1.5 in. x 3 in. tubular steel.
  • Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75 in.-diameter cutter housing with 25mm (.98 in.) diameter spindle shaft and splined blade driver.
  • Electrical: 12-volt battery with 15-amp alternator.
  • Standard Features: Engine hour meter and cup holder
  • Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Power Components
  • Engine Brand: Kawasaki
  • Transmission Speeds: Infinitely Variable
  • Engine Model: FX801V
  • Engine Displacement: 852
  • Speed: Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse.
  • Transmission: Hydrostatic
  • Engine Series: V-Twin
  • Engine Speed: 3,750 RPM
  • Drive: Hydro-Drive
  • Engine Spec: FX801V-MS04-R
  • Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
  • Air Filter: Heavy-duty canister air filtration system
  • Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Fuel Type: Gas Carbureted
  • Fuel Indicator: Yes - electronic Sender
  • Drive Wheel Release: Allows unit movement without engine running.
  • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
  • Carb Compliant: No
  • Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • ROPS: 2-post foldable ROPS standard with seat belt and latch.
Decks
  • Deck Style: Floating Deck
  • Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • Width / Cutting Deck: 72 in.
  • Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • Cutting Heights: 1.0 in. (2.5 cm) to 5.5 in. (11.8 cm) in 0.25 in. (0.64 cm) increments adjustable from operator's seat.
  • Blade Tip Speed: Approximately 18,500 fpm.
  • Blades: 3 Blades at 24.50 in. Length
Dimensions
  • Width: 84.9 in. (215.6 cm)
  • Height: 70.5 in. (179.1 cm)
  • Length: 86.1 in. (218.7 cm)
  • Curb Weight: 1387
Lazer Z E-Series Accessories
  • Hitch: Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.
  • 12-Volt Power Adapter: Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)
  • Harness Add-On Accessory Kit: Take the hassle out of dual accessory fit up with this add-on harness.
  • UltraVac Completing Kit: KIT, UV DRIVE 724 SPLINED 920,000 +
  • Turf Striper: Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.
  • Standard Seat: SEAT-EXMARK STANDARD
  • Sun Shade: Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)
  • Hydro Maintenance Kit: Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)
  • Jack: Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
  • Tractus Tire: Tractus Tire
  • Light Kit, LED (not compatible with TC26): Light Kit
  • Slope Sensor: Slope Sensor Kit
  • Operator Controlled Discharge Gate & Cable Assembly: Operator Controlled Discharge Lever (Foot)
  • Operator Controlled Discharge Lever, Foot: Operator Controlled Discharge Lever (Foot)
  • Jack Mount Receiver: Safely access the underside of your zero-turn mower's deck. Used with Exmark's Bulldog jack (p/n 127-6666 sold separately) attaches for smooth lift without hassle or strain, thanks to its comfortable, ergonomic design. Built for years of reliability.
  • UltraVac Collection System, 3 Bag: The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.
  • UltraVac Quick Dump Collection System: The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.
  • Micro-Mulch System: The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.
  • Trash Container (Not compatible with 135-7320): Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.
NOTES:
N/A in California

Engine

Engine Manufacturer Kawasaki
Engine Type FX801V
Displacement 852cc

General

Transmission Hydro-Drive
Wheel Size 24 x 12-12, 4 ply Super Turf®
Fuel Capacity 12 gal. (45.4 L)

Deck

Deck Size 72 in.
Discharge Type Side; Optional: Bag, Mulch

Shopping Tools